|  |
|
Our commitment to developing products that meet each user's individual needs has led to one of the world's largest ranges of trimmers and brushcutters. Many of these machines are equipped with Husqvarna's E-TECH engine, an innovation that gives high performance combined with lower emissions. Many of our products have vibration-damped handles that are based on our LowVib system. Handles and harnesses are ergonomically designed and our machines are carefully balanced so that you can work for longer periods with less strain on your back and shoulders. Brushcutter shafts are set at a slight angle so that you can sweep a larger area without twisting your back. They are also equipped with a throttle lock that prevents accidental operation. The new Whisper trimmer line gives our trimmers lower noise levels and faster acceleration.
|
Models 232L, 125C, 125L, 125LD, 223L, 323L, 326L eTechII, 324LX
are not approved for use in California
|
Husqvarna Power Trimmer
|
| Accessories - CLICK HERE
| Husqvarna equipment and accessories have been developed for Husqvarna trimmers and brush cutters. Together, the various components make up an effective and proven system that guarantees quality, function and safety. That's why it makes such good sense to choose original Husqvarna parts.
| |
 | | Tricut
For slightly coarser grass. Has clearly visible plastic blades. Blades are replaceable. | |  | | Trimmer heads
For trimming all types of grass. Available with fixed cord, manual cord feed, semi or fully automatic cord feed. | |  | | Grass cutters
For dense grass, brush and smaller bushes (up to approx. Ø 1 cm). Grass cutters have three or four teeth. | |  | | Grass blades
Four or eight teeth. Cut the grass so that it falls onto the blade and can be deposited to one side in neat rows. | |  | | Forestry clearing saw blades
Available in Ø 200 and 225 mm. Able to fell trees up to 20 cm in diameter. | |  | | Trimmer lines
High quality nylon cords, Whisper our "top of the line" cord, reduces noise level with up to 50%. | |  | | Blade guards and support cups
Always use the correct blade/spray guard with your cutting equipment. Use a blade guard to prevent the blade from digging into the ground. | |  | | Harnesses
Available in different sizes from light to heavy duty work. | |
|
| Models ; | ;Cylinder Displacement cu. in. (cc) | Engine Power kW (hp) ; | ;Maximum
No-Load RPM | ;Fuel Capacity
pt. (litres) | ;Weight w/o Harness & Accesories lbs. (kg) | ;Power to Weight Ratio kW/kg | 322C | 1.3 (22.0) | 0.7 (0.9) | 11,000 | 1.3 (0.6) | 8.8 (4.0) | .18 | 325C | 1.5 (25) | 0.9 (1.2) | 11,000 | 1.3 (0.6) | 8.8 (4.0) | .21 | 232RJ | 1.9 (31) | 1.1 (1.5) | 10,800 | 1.3 (0.6) | 13.7 (6.52) | .18 | 322L | 1.3 (22.0) | 0.7 (0.9) | 11,000 | 1.3 (0.6) | 8.8 (3.8) | .21 | 325L | 1.5 (25) | 0.9 (1.2) | 11,000 | 1.3 (0.6) | 9.2 (1.2) | .21 | 325LX | 1.5 (25) | 0.9 (1.2) | 11,000 | 1.3 (0.6) | 9.3 (4.1) | .22 | 325LX
E-tech II | 1.5 (25) | 0.9 (1.2) | 11,000 | 1.3 (0.6) | 9.9 (4.5) | .20 | 322R | 1.3 (22.0) | 0.7 (0.9) | 11,000 | 1.3 (0.6) | 10.1 (4.6) | .15 | 325RX | 1.5 (25) | 0.9 (1.2) | 11,000 | 1.3 (0.6) | 10.4 (4.7) | .19 | 325RJX | 1.5 (25) | 0.9 (1.2) | 11,000 | 1.3 (0.6) | 9.3 (4.1) | .22 | 232L | 1.9 (31) | 1.1 (1.5) | 10,800 | 1.05 (0.5) | 13.6 (6.2) | .18 | 232R | 1.9 (31) | 1.1 (1.5) | 10,800 | 1.3 (0.6) | 14.2 (6.5) | .17 | 235R | 2.2 (36) | 1.3 (1.8) | 11,000 | 1.3 (0.6) | 16.0 (7.3) | .18 | 245R | 2.7 (44) | 2.0 (2.7) | 12,500 | 1.7 (0.8) | 18.3 (8.3) | .24 | 245RX | 2.7 (44) | 2.0 (2.7) | 12,500 | 1.7 (0.8) | 18.3 (8.3) | .24 | 265RX | 4.0 (65) | 3.4 (4.7) | 11,000 | 2.1 (1.0) | 23.1 (10.5) | .32 | 322E
Edger | 1.3 (22) | 0.7 (0.9) | 11,000 | 1.3 (0.6) | 11.2 (5.0) | .14 | 325EX
Edger | 1.5 (25) | 0.9 (1.2) | 11,000 | 1.3 (0.6) | 11.7 (5.3) | .15 | 325CX | 1.5 (24.5) | 0.9 (1.2) | 11,000 | 1.3 (0.6) | 8.8 (3.8) | .23 |
|
|
