MULTIQUIP PORTABLE WELDER / GENERATOR 250 DC WELDER, 7.2KW GENERATOR

This unit delivers up to 250 amps of DC welding power in CC (constant current) or CV (constant voltage) mode. As a generator it provides up to 7.2kW of 120/240-volt AC power. This unit can be simultaneously used as a welder and generator. The remote control allows the operator to adjust amperage from up to 50 feet (15 meters) from the machine.

Meets EPA Tier II emissions regulations
Electric-start, gasoline-powered
CC and CV welding capability
Excels in SMAW, FCAW, GMAW, GTAW and ACAC welding processes
Standard features include external oil and fuel drains and a lifting bail
Low noise level-produces only 74dBA
Remote control allows operator to work 50 feet (15 meters) from the welder

UNIT SPECIFICATIONS
DC Voltage	CC: 28 V	CV: 15-28 V
DC Current	CC: 225 A	CV: 250 A
Current Range	50-250 A
Max Duty Cycle w/ Full Amps Availible	100% @200 A
Welding Processes	SMAW FCAW GMAW GTAW ACAC
Fuel Tank Capacity	9.2 gal	41.8 L
Fuel Consumption at Rated Load	0.76 gph

DIMENSIONS & WEIGHTS
Overall Length	43 in	109.22 cm
Overall Width	24 in	60.96 cm
Overall Height	33 in	83.8 cm
Shipping Dimensions	44 x 25 x 37 in 111.8 x 63.5 x 94 cm
Operating Weight	500 lb	227.3 kg
Shipping Weight	510 lb	231.8 kg

GENERATOR FEATURES
AC Power Output (Single Phase)	7.2 kW
Cycle	50/60 Hz
Voltage	120/240 V
Amperage	60/30 A
Voltage Regulation	2 %
Receptacles	NEMA 5-20R 125V GFCI 20A NEMA L5-20R 125V Twist-Lock 20A NEMA L14-30R 125/250V Twist-Lock 30A

GENERAL FEATUERS & OPTIONS
AC/DC Simultaneous Use	Standard
Lifting Bale	Standard
External Drains	oil / fuel
Automatic Safety Shutdown	Oil Level Thermal Switch DC Low Battery Charge
Idle Switch	Standard
Optional Trailer	TRLR-10W, TRLR-MPXF**

**TRLR-MPXF has a built in 28 gal. fuel cell

ENGINE SPECIFICATIONS
Engine Make/Model	Honda GX-610
Start Method	Electric
Engine Power	18 HP	13.4 kW
Engine RPM	3600
Fuel Type	Gasoline