MULTIQUIP PORTABLE WELDER / GENERATOR 225 DC WELDER, 6KW GENERATOR,

This model delivers up to 225 amps of DC welding power in CC (constant current) or CV (constant voltage) mode. As a generator it provides up to 6kW of 120/240 volt AC power. This unit can be simultaneously used as welder and generator. Remote control allows the operator to adjust amperage from up to 50 feet (15 meters) from the machine.

Suits SMAW, FCAW, GMAW, GTAW and ACAC welding processes
Operates as a 6kW generator and 225-amp welder
Powered by a 12.3-hp Kubota Z482 diesel engine
Brushless machine with a weather-resistant housing
Regulates voltage at 2%
Low noise level-produces only 68.7 dBA
Also available in light tower configuration as model MLTSDW7
Full instrumentation including controls for both CC and CV
Remote control allows operator to work 50 feet (15 meters) from the welder

UNIT SPECIFICATIONS
DC Voltage	CC: 28 V	CV: 15-28 V
DC Current	CC: 225 A	CV: 225 A
Current Range	50-225 A
Max Duty Cycle w/ Full Amps Availible	100% @200 A
Welding Processes	SMAW FCAW GMAW GTAW ACAC
Fuel Tank Capacity	6.6 gal	30 L
Fuel Consumption at Rated Load	0.6 gph

DIMENSIONS & WEIGHTS
Overall Length	46 in	116.8 cm
Overall Width	26 in	66 cm
Overall Height	32 in	81.3 cm
Shipping Dimensions	46 x 26 x 36 in 116.8 x 66 x 91.44 cm
Operating Weight	735 lb	334 kg
Shipping Weight	770 lb	350 kg

GENERATOR FEATURES
AC Power Output (Single Phase)	6 kW
Cycle	50/60 Hz
Voltage	120/240 V
Amperage	50/25 A
Voltage Regulation	2 %
Receptacles	NEMA 5-20R 125V GFCI 20A NEMA L5-30R 125V Twist-Lock 30A NEMA L14-30R 125/250V Twist-Lock 30A

GENERAL FEATUERS & OPTIONS
AC/DC Simultaneous Use	Standard
Lifting Bale	Standard
External Drains	Standard
Automatic Safety Shutdown	Oil Switch Water Temperature Thermal Switch DC Low Battery Charge
Idle Switch	Standard
Optional Trailer	TRLR-10W, TRLR-MPXF*

* Requires Adapter kit, **TRLR-MPXF has a built in 28 gal. fuel cell