MULTIQUIP PORTABLE WELDER / GENERATOR 225 DC WELDER, 6KW, GENERATOR,

This model delivers up to 225 amps of DC welding power in CC (constant current) or CV (constant voltage) mode. As a generator it provides up to 6kW of 120/240 volt AC power. This unit can be simultaneously used as welder and generator.

Suits SMAW, FCAW, GMAW, GTAW and ACAC welding processes
Operates as a 6kW generator and 225-amp welder
Powered by a 12.3-hp Kubota Z482 diesel engine
Brushless machine with a weather-resistant housing
Regulates voltage at 2%t
Low noise level of only 68.7dBA
Also available in light tower configuration as model MLTSDW7
Full instrumentation including controls for both CC and CV

UNIT SPECIFICATIONS
DC Voltage	CC: 28 V	CV: 15-28 V
DC Current	CC: 225 A	CV: 225 A
Current Range	50-225 A
Max Duty Cycle w/ Full Amps Availible	100% @200 A
Welding Processes	SMAW FCAW GMAW GTAW ACAC
Fuel Tank Capacity	6.6 gal	30 L
Fuel Consumption at Rated Load	0.6 gph

DIMENSIONS & WEIGHTS
Overall Length	46 in	116.8 cm
Overall Width	26 in	66 cm
Overall Height	32 in	81.3 cm
Shipping Dimensions	46 x 26 x 36 in 116.8 x 66 x 91.44 cm
Operating Weight	735 lb	334 kg
Shipping Weight	770 lb	350 kg

GENERATOR FEATURES
AC Power Output (Single Phase)	6 kW
Cycle	50/60 Hz
Voltage	120/240 V
Amperage	50/25 A
Voltage Regulation	2 %
Receptacles	NEMA 5-20R 125V GFCI 20A NEMA L5-30R 125V Twist-Lock 30A NEMA L14-30R 125/250V Twist-Lock 30A

GENERAL FEATUERS & OPTIONS
AC/DC Simultaneous Use	Standard
Lifting Bale	Standard
External Drains	Standard
Automatic Safety Shutdown	Oil Switch Water Temperature Thermal Switch DC Low Battery Charge
Idle Switch	Standard
Optional Trailer	TRLR-10W, TRLR-MPXF*

* Requires Adapter kit, **TRLR-MPXF has a built in 28 gal. fuel cell

ENGINE SPECIFICATIONS
Engine Make/Model	Kubota Z482
Start Method	Electric
Engine Power	32 HP	23.8 kW
Engine RPM	2800
Fuel Type	Diesel